DATA SMART3+ IMMO FULL

Introduction :

DATA SMART3+ is a hand-held multi-function programmer for car immobilizers.
Powered by two CORTEX ARM cores, speeds up to 200MHZ.,
With SD card interface to load and save files,
320*240 TFT LCD with 256K colors to show pictures and help files in great detail.
Integrated CAN-BUS / J1850 / CCD-BUS / ISO9141 / SPI protocols in one multifunctional interface.

Function:
DataSmart3 can do new generation immobilizer systems and key programming via obd2 ,
it can use on Audi - Chrysler - Ford - Mazda - Seat - Skoda - VolksWagen cars.
Ford / Mazda: Key learning by OBD2 (not need code) for CAN-BUS cars.

- Make dealer keys by Megamos48 chip (using transponder adapter).
- Key learning by OBD2 (not need code , not need online).
- Cover all VW / SKADA / SEAT cars that use NEC+24C64 or NEC+24C32 or
- Micronas or 9s12xhz512(1M80F) MCU in dashboard, you can do it via OBD2

4th Generation immo
Audi A1, A3, A6,  TT, Q7
VW Beetle, Bora, Caddy, E0S, Golf6, Jetta, Lavida, Passat, Polo,
Sagitar, Scirocco, Tiguan, Touran, Transporter

5th Generation immo
Audi A4L,  A5, Q5, A6L, A7, A8, Q7
VW Toureg , Beetle

software:
English Language*
Chinese Language*
(* you can select to one language only)
OBD functions for Immo are all active .
LCD colur screen hand-held tool . all help files and pictures include in tool.

 

PACKING LIST :

Hand-Held Main hardware
OBD2 Adapter
Main cable
Code Box
Transponder Adapter
Eeprom Adapter
BCM2 Adapter
Power cable
Usb cable
soic8 connector,and cables

weight : 2KG with packing

For some OBD function , the tool may show you message :
“010C Please make sure that OBD ADAPTER AND
CODE BOX are connected well.”

Please do connection as the following picture：