How you can install Allscanner VCX Durable Diagnostic

               The next part is Allscanner VCX Durable Diagnostic installation simple guide:

1. Install OEM Software

Must first install the OEM software! Based on

Your products configuration, choice to install:

Ienc Techstream

HONDA Diagnostic System

VIDA2008C

2. Install VCX32 Driver

This task Should be adopted after the first step

1)To set up VCX32 Driver the following:

Double-click VCX32 Driver Install.exe, click NEXT.

2)Read License agreement and choose accept the the License agreement, click NEXT.

3)Input user information, click NEXT

4)Choose kind of installation:completed Install, click NEXT

5)Prepared to install, click Alongside stat.

6)Installing......

7)Display VCX USB Driver Installation Wizard, click NEXT

8)Driver Installing......Driver Installation finished, click Finish

9)All Installation complete, click Finish

3. Install OEMSetup

Based on your products configuration, choice to install the support driver for OEM: Start->Program->ALLScanner->VCX32-OEMSetup

4. Connect Hardware

Have to connect hardware exactly before figuring out: PC-usb cable-VCX-DTC cable-truck.

VCX obtain energy from vehicle through DLC cable. The Brought will expensive consequently after hardware proper connection. Energy Brought continue. VCX interact with PC through USB cable.

5. Install VCX USB Driver

1) Connect VCX USB cable to PC by the very first time, it'll hint that new hardware was discovered, please make reference to the next: Display Found New hardware wizard, Choose No, not this time around, click NEXT.

2) Choose Install the program instantly, click NEXT

3) Click Continue Anyway

4) New hardware wizard completed, click Finish. Found new hardware wizard, is going to be displayed again, operation is just like above.

6. Test VCX Connection

Record the next before connection

testing:

-Connect hardware based on section 4.1

-Install USB Driver based on section 4.2

Double-click DeviceConfig around the desktop.

1)Choose the Connect page.

2)Click Connect

7. Activate VCX Device

1) Connect hardware, Open DeviceConfig

2)Display as above Fig, it shows device wasn't triggered. Click OK, And Click On Connect.

3) Choose the unit Activate page, Please record Device SN and Active Code, provide these to dealer for License (Activation file)

4) After receiving License file, click Choose License to choose this file.

5) Click Activate, Display the unit is triggered, it shows Activation effective. ClickOK

8. Configure Wi-Fi network

1) Record the next before using:

- Only use the wireless router incorporated within the package

- 802.11a/b/g wireless card required for Laptop Connect VCX to Vehicle and obtain energy from this. Switch on the wireless router.

First, Make Laptop for connecting towards the wireless network:

Internet Title(SSID):DIAG-Wi-fi compatability

Connect KEY:1234512345

2)Open DeviceConfig, Choose the Wi-fi compatability Configure page, and Choose Wi-fi compatability. Then click Scan Wi-fi compatability.

3)Following a effective scan, it'll list all products with IP. Then choose the IP of device, and click on Connect with interact with Device.

4)Warning Any changes towards the wireless router would make the device not to work.